Molybdenum Additive (Cold)

Molybdenum Wax Additive

• Cold or warm wax mix with 4% Moly load
• 40 grams
• Single Stick in clamshell
• Cold -20℉-10℉ / Warm 10℉-40℉

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers!

Fast Wax has two versions of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in.

The Cold Version is for temps -20 to 10F.

To use, remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2" will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain.

Moly will help keep your base clean by reducing electrostatic friction, aka "static cling". With a reduction in electrostatic buildup on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail.

When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. Wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base.